TECHNOSTONE 3000 X 1500 (118” x 59” )
& TECHNOSTONE 4000 x 2300 (157” x 90”)

 

4 Axis numerically controlled work centre for edging, writing, drilling, sawing, routine, bevelling, engraving, lowering:

TECHNOSTONE OVERVIEW

  • REDUCE machine set up times through the use of a LASER projector for positioning stops and suctions cups.

  • MEASURE tooling on board the machine with precision by means of a LASER measuring system.

  • MONITOR all your machines and their production outputs in real time thanks to Ethernet card.

  • PROGRAM using standard systems readily available on the market.

  • and much more…

SOFTWARE

Dedicated software for CAD – CAM programming

  • BIM-CAD system of CAD - CAM programming developed and perfected by the Bimatech staff of programmers and engineers.

  • Graphic simulation of the tool path, on screen and in real time for greater operator control.

  • Calculation of the Costs and Times of machining.

  • Parametric Library containing an archive of shapes which can be updated and assigned to pre-memorized CAM sequences for fast programming.

  • Self-learning of any template in any material by LASER system.

HARDWARE

Dedicated hardware for axis movement

Osai series 2000 Numerical Control

  • 32 Mb RAM user memory.

  • 5 Gb hard disk for Part Programs.

  • Integrated PLC.

  • Integrated Ethernet circuit.

  • 3.5” Disk drive.

  • Machine, NC and Servo Motors interfaced by propriety fieldbus unaffected by electromagnetic disturbance.

  • “Quick control” panel on board the machine accessible by the operator.

  • Digital axis movement system.

Dedicated hardware for CAD – CAM programming

  • Pentium Personal Computer with Windows XP operating system

  • min. 256 Mb RAM Memory

  • min. 20 Gb Hard disk

  • Integrated CD-ROM

STANDARD FEATURES

  • Laser probe for template self-learning

  • ISO 40 Aggregate for writing and decoration on the surface of slabs with diamond bit + managing software

  • 1 Drilling bit dresser + managing software

  • 4 ISO 40 tool head cones (shaft diameter 35 mm., height 34 mm.)

  • 5 ISO 40 tool head cones (shaft diameter 22 mm., height 33 mm.)

  • 2 ISO 40 tool head cones for routing/drilling bit. (1/2 GAS )

  • 1 ISO 40 tool head cone for positioning stops

  • 1 ISO 40 tool head cone to hollow out counter sinks (Ø mm 50 - h. 6 mm)

  • 2 Suction cups (65 mm. diameter – h. 140 mm)

  • 4 Square suction cups mm 200 x 200

  • 4 Square suction cups mm 150 x 150

  • 6 Telescopic retractable stops with pneumatic fixing

  • 1 Diamond Wheel - Sector - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 1 Diamond Wheel - Rough Grit - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 1 Diamond Wheel - Medium Grit - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 1 Diamond Wheel - Fine Grit - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 2 Polishing Wheels - Granite 600 - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 2 Polishing Wheels - Granite 1000 - Round profile - Slab thick. 30 mm. - Ø 120 mm

  • 1 Diamond routing bit for granite Ø 20 mm

  • 1 Electroplated routing bit marble Ø 16 mm

  • 1 Drilling bit granite/marble Ø 35 mm

  • 1 Pair of pneumatic stops with blocking bars

  • 2 Pneumatic clamps

  • Personal Computer not included

OPTIONS

  • BTS111 Additional rotating axis ( RVG ) for using aggregates + managing software – unlimited 360°

  • BTS102 LASER projector for positioning stops and suction cups on work area

  • BTS104 LASER Pre-setter fitted on board machine for measuring tool diameters + Software "Tools by family"

  • BTS113 ISO 40 Aggregate for circular saw ( flat ) 200 mm. disk + managing software ( only with additional rotating axis )

  • BTS114 ISO 40 Aggregate for circular cup saw 180 mm. disk + managing software ( only with additional rotating axis )

  • BTS125 3D Technoscan LASER reader for automatic copying of three dimensional models + managing software + BTS126 Phoprocessor Program for the transformation of a picture or an image on paper into a bas-relief.

  • BTS126 Phoprocessor Program for the transformation of a picture or an image on paper into a bas-relief.

  • BTS127 OPTIDRILL Optimisation software for drilling diagrams for bronze lettering

TECHNICAL SPECIFICATIONS

Tool Storages 16 – ( 8 + 8 )

Dimensions of installed machine

  • Length mm 6130 ins 241

  • Width mm 3440 ins 135

  • Height mm 2700 ins 106

Dimensions of operator console

  • Length mm 990 ins 39

  • Width mm 950 ins 37

  • Height mm 1450 ins 57

Axis strokes

  • Transverse axis (x) mm 3000 ins 118

  • Longitudinal axis (y) mm 1500 ins 59

  • Vertical axis (z) mm 390 ins 15

  • Tilting axis (tlt) + / - 3°

Feeds

  • Working air pressure Bar 7

  • Air consumption litres/min 800

  • Working water pressure Bar 2,5

  • Water consumption litres/min 6,5 (or recycling)

  • Electrical power required KW 28

Dimensions for shipping

  • Container 20’’ Open Top

Dimensions for expedition by truck

  • Length mm 6100 ins 240

  • Width mm 2230 ins 88

  • Height mm 2400 ins 94

  • Weight kg 6000 LB 13.227,6

Bimatech is not responsible for any errors and reserves the right to modify all or part of the technical specifications of its own products without notice.

SERVICE ASSISTANCE

Web service

  • Direct contact with our technical service department

  • Immediate identification of component to be replaced

  • Assisted technical service

  • Remote consulting for perfect utilization of machine.

Internet service

  • Real time monitoring of all connected machines

  • Remote technical assistance

  • Production data collection for statistics use

  • Connection of machines to the local network

  • Optimized program distribution between various connected machines

  • Connection of complementary machines

 

Pinnacle Stone Solutions is an authorized sales agent for Bottero products